Skip to main content

Shop

Equipment

Brewing & kegging equipment, hardware and accessories.

Showing 169–180 of 356

Ball Lock Mini Keg Tapping Head KL06972

KegLand

Ball Lock Mini Keg Tapping Head KL06972

This is the Tapping Head for the KegLand Mini Keg. The thread on these mini kegs is 1inch 16TPI.

$35.95
Ball Lock Tapping Head to 2inch Tri-Clover KL10610

KegLand

Ball Lock Tapping Head to 2inch Tri-Clover KL10610

These keg spears have been designed for commercial use and will use larger and high flow rate commercial keg. The tri-clover fittings are also very sanitary and suitable for this application.

$52.95
Bulb 74g Adapter KL20213

KegLand

Bulb 74g Adapter KL20213

T his adaptor for the Core 360 Mini Regulator will allow you to use the oversized disposable 74gram co2 bulbs so you can take your keg system anywhere.

$9.95
Burst Disc 2.6/6kg Cylinders KL16438

KegLand

Burst Disc 2.6/6kg Cylinders KL16438

This is a replacement 3000psi burst disk for KegLand 2.6kg or 6.0kg CO2 Cylinders. If you leave a cylinder in a hot car or hot garage the temperatures are likely to exceed safe working pressures for the cylinder itself.

$5.95
Carbonation Cap Plastic KL10788

KegLand

Carbonation Cap Plastic KL10788

This plastic carbonation cap has been designed to suit soda bottes, coke bottles, and FermZilla lids. If you have a keg system you should have at least a couple of these as they are so useful.

$6.95
Carbonation Cap Plastic KL10788-Y

KegLand

Carbonation Cap Plastic KL10788-Y

Are you sick of mixing up your FermZilla ports, wish there was a different colour for your liquid line? Liquid Gold is all you need to remember this beauties function. Whack your silicone dip tube to this baby and never

$6.95
Clamp Stepless 16-18mm KL0629

The Brew Store

Clamp Stepless 16-18mm KL0629

Stepless clamps are designed to tighten in an exact circle around the hosing, sinply use a crimping tool or the middle cutter on your pliers to crimp (not squeeze) the stepless clamp closed.

$0.50
Clamp Stepless 17-20mm KL06736

KegLand

Clamp Stepless 17-20mm KL06736

Stepless clamps are designed to tighten in an exact circle around the hosing, sinply use a crimping tool or the middle cutter on your pliers to crimp (not squeeze) the stepless clamp closed.

$0.50
Co2 Big Bulb 74g KL16889

KegLand

Co2 Big Bulb 74g KL16889

Typically you will use about 6g per litre of Co2 for carbonating and/or 6g per litre to dispense. Perfect for parties where you're cranking out more than your average bear! This Co2 Cartridge has a much larger thread tha

$9.95
Cylinder SodaStream Filled 420g

KegLand

Cylinder SodaStream Filled 420g

- Australian Standard Approved - Holds 450grams of CO2 when full - G1/2 Thread - Dimensions 37cm high x 6cm diameter

$35.00
D-type & S-type Keg Opening Tool for Commercial Kegs KL02745

KegLand

D-type & S-type Keg Opening Tool for Commercial Kegs KL02745

These are primarily designed to be used with the 50L D-Type and S-Type Spear kegs that we stock which do not have a tamper locking circlip. A-type keg opening tool suitable for CUB, Fosters, Asahi, Heineken, Mountain Goa

$40.00
Disconnect Stainless Gas MFL KL09539

KegLand

Disconnect Stainless Gas MFL KL09539

KegLand 304 Machined Stainless Steel Gas (Grey) Ball Lock Disconnect With Barbed Fitting are the top of the range in stainless steel Cornelius disconnects. For both the commercial sector using corny kegs and for high-end

$24.95